Bartell Morrison Inc. » Morrison » Material Spreaders » End Adaptor & Wheel Assembly (4 wheels/end)
End Adaptor & Wheel Assembly (4 wheels/end)

End Adaptor & Wheel Assembly (4 wheels/end)

Features
• Available in 2.5', 5' and 10' (0.7, 1.5, 3 m) sections.
• Material flow is adjustable from 2 ounces to 3 pounds (0.05 to 1.4 kg) per square foot.
• Bridge section weighs only 7 lbs (3.2 kg) per foot. Hydraulically agitated hopper weighs 308 lbs (140 kg).
• Flow rate control is independent from hopper travel speed.
• Hopper height is adjustable from 2" (5.0 cm) to 18" (45.7 cm) over slab.
• Bolted construction makes on-site length changes and adjustments quick and easy using everyday tools.
• Metered flow valve assures precise application of expensive toppings.
• The MS40 is capable of spanning slabs from 10' (3 m) to 75' (23 m).


Performance Characteristics

Capacity   4.5 cubic ft (127 l)
Maximum Load   600 lbs. (272 kg)
Engine   5.5 hp Honda
Discharge Height Adjustable from 2" (5.0 cm) to 18" (121.9 cm)
Discharge Width   48" (122 cm)
Weight Hopper 461 lbs (210 kg)
  2.5' (0.7 m) section 25 lbs (11 kg) 55"
  5' (1.5 m) section 42 lbs (19 kg)
  10' (3 m) section 81 lbs (37 kg) (76 cm)
  Wheel Assembly 270 lbs (123 kg) (3.81 to 23.62 m)
Span   up to 75' (23 m) 14' to 79'

Available Configurations
 50Ft (4x5ft+3x10ft)
 52.5Ft (4x5ft+3x10ft+2.5ft)
 55Ft (3x5ft+4x10ft)
 57.5Ft (3x5ft+4x10ft+2.5ft)
 60Ft (4x5ft+4x10ft)
 62.5Ft (4x5ft+4x10ft+2.5ft)
 65Ft (5x5t+4x10ft)
 67.5Ft (5x5ft+4x10ft+2.5ft)
 70Ft (4x5ft+5x10ft)
 72.5Ft (4x5ft+5x10ft+2.5ft)
 75Ft (5x5ft+5x10ft)
 77.5Ft (5x5ft+5x10ft+2.5ft)